Lenze EVF9333−xV - Manual (Page 315)

Configuration
Function blocks
Internal motor control with vector control (MCTRL2)
8
8.2
8.2.7
l
8.2−53 EDSVF9333V EN 6.2−04/2012
IMPORTANT Possible settings Code
Selection Lenze Name No.
C0091
s
Mot cos phi à 0.50 {0.01 } 1.00 Motor cos j
à depending on C0086
l Motor selection in C0086 sets
the corresponding motor cos
j
in C0091
l Change of C0091 sets
C0086 = 0
^ 6.6−1
C0092
s
Mot Ls à 0.0 {0.1 mH} 6500.0 Motor stator inductance
à Value is evaluated by motor
parameter identification from
C0088, C0089, C0090 and
C0091
à Selection of a motor in C0086
sets the corresponding stator
inductance value in C0092
^ 6.6−1
C0095
s
Mot Io à 0.00 {0.01 A} 1000.00 Motor magnetising current
à depending on C0086, C0088
and C0091
l Change of C0086, C0088 and
C0091 sets C0095 to the Lenze
setting
l Change of C0095 sets
C0086 = 0
^ 6.6−1
^
6.11−5
C0105 QSP Tif 5.00 0.00 {0.01 s} 999.90 Quick stop deceleration time
l The deceleration time refers to
a speed variation of C0011 ... 0
^
8.2−25
^
8.2−48
C0107 holding time 0.00 0.00 {0.01 s} 9999.90 Hold time for automatic DC
injection braking (Auto−GSB)
^
8.2−25
^
8.2−48
C0132
s
Controller
enable fly
delay à 0 {1 ms} 9999 Minimum time for controller
inhibit with active flying restart
circuit, delays the start of the
flying restart process after
controller enable
à depending on C0082, C0086,
C0087, C0088, C0089, C0090,
C0091, C0092
A change of one of the codes
resets C0132 to the minimum
time of the selected motor
l The time is derived from the
double rotor time constant
^
8.2−25
^
8.2−48