Rockwell Automation 1761-HHP-B30 MicroLogix 1000 with Hand-Held Programmer (HHP) - Manual (Page 386)

Appendix A
Hardware Reference
A–2
General Specifications
Description: Specification: 1761-L cription:
16AWA 20AWA-5A 32AWA 10BWA 16BWA 20BWA-5A 32BWA 32AAA 16BBB 10BWB 16BWB 20BWB-5A 32BWB 32BBB
Memory Size and
Type 1 K EEPROM (approximately 737 instruction words: 437 data words)
Power Supply
Voltage 85–264V ac, 47-63 Hz 20.4–26.4V dc
Power 120V ac 15 VA 20 VA 19 VA 24 VA 26 VA 30 VA 29 VA 16 VA Not Applicable
Supply
Usage
240V ac 21 VA 27 VA 25 VA 32 VA 33 VA 38 VA 36 VA 22 VA
Usage
24V dc Not Applicable 5W 10W 7W
Power Supply
Maximum Inrush
Current
➀
30A for 8 ms 30A for 4 ms 50A for 4 ms 30A for 4 ms
24V dc Sensor
Power (V dc at mA) Not Applicable 200 mA Not Applicable
Max Capacitive
Load (User 24V dc) 200
µ
F
Power Cycles 50,000 minimum
Operating Temp. Horizontal mounting: 0
°
C to +55
°
C (+32
°
F to +131
°
F) for horizontal mounting
Vertical mounting
➁
: 0 ° C to +45 ° C (+32 ° F to +113 ° F) for discrete; 0 ° C to +40 ° C (+32 ° F to +113 ° F) for analog
Storage Temp. –40 ° C to +85 ° C (–40 ° F to +185 ° F)
Operating Humidity 5 to 95% noncondensing
Vibration Operating: 5 Hz to 2k Hz, 0.381 mm (0.015 in.) peak to peak/2.5g panel mounted,
➂
1hr per axis
Non-operating: 5 Hz to 2k Hz, 0.762 mm (0.030 in.) peak to peak/5g, 1hr per axis
Shock
➃
Operating: 10g peak acceleration (7.5g DIN rail mounted)
➄
(11 ± 1 ms duration) 3 times each direction, each axis
Non-operating: 20g peak acceleration (11 ± 1 ms duration), 3 times each direction, each axis
Agency Certification
(when product or
packaging is
marked)
•
C-UL Class I, Division 2 Groups A, B, C, D certified
•
UL listed (Class I, Division 2 Groups A, B, C, D certified)
•
CE marked for all applicable directives
Terminal Screw
Torque 0.9 N-m maximum (8.0 in.-lbs)
Electrostatic
Discharge IEC801-2 @ 8K V Discrete I/O
4K V Contact, 8K V Air for Analog I/O
Radiated
Susceptibility IEC801-3 @ 10 V/m, 27 MHz – 1000 MHz except for
3V/m, 87 MHz – 108 MHz, 174 MHz – 230 MHz, and 470 MHz – 790 MHz
Fast Transient IEC801-4 @ 2K V Power Supply, I/O; 1K V Comms
Isolation 1500V ac
➀
Refer to page 1–11 for additional information on power supply inrush.
➁
DC input voltage derated linearly from 30
°
C (30V to 26.4V).
➂
DIN rail mounted controller is 1g.
➃
Refer to page 1–14 for vertical mounting specifications.
➄
Relays are derated an additional 2.5g on 32 pt. controllers.