Rockwell Automation 1761-HHP-B30 MicroLogix 1000 with Hand-Held Programmer (HHP) - Manual (Page 84)

Chapter 4
Using Your Hand-Held Programmer
4–17
When your MicroLogix 1000 HHP arrives, it has the following factory
default settings:
Feature Default Setting
Language English
Contrast
You can use the menu options to change the default settings of these features,
as described in the following sections. Any changes you make are saved
when power is cycled, so you will not need to set them every time the HHP
powers up.
Selecting the Language
You can configure the HHP to display prompts and messages in one of six
languages: English, Spanish, German, French, Italian, and Japanese. There
are two methods you can use to select a new default setting.
Using the Menu Option
Follow the steps below to change the language using the menu.
1. Access the menu and choose the option 1.LANGUAGE .
MENU
I
E N G L I S H
E S P A N O L
2. Arrow down to the desired language, select it, and return to the previous
screen.
n times
ENT ESC
Changing the HHPs Defaults