Rockwell Automation 1761-HHP-B30 MicroLogix 1000 with Hand-Held Programmer (HHP) - Manual (Page 60)

Chapter 3
Connecting the System
3–7
DF1 Isolated Point-to-Point Connection
24V dc
(Not needed in this configuration since
the MicroLogix 1000 provides power to
the AIC+ via port 2.)
1747-CP3 or 1761-CBL-AC00
MicroLogix 1000
PC
1761-CBL-AM00
or
1761-CBL-HM02




Selection Switch Up
AIC+
(1761-NET-AIC)
DH-485 Network Connection
MicroLogix DH-485 Network
PC
connection from
port 1 or port 2
to MicroLogix
1761-CBL-AM00
or
1761-CBL-
HM02
AIC+
(1761-NET-AIC)
24V dc
(A user supply is not needed if a
MicroLogix 1000 controller is
connected to port 2.)
24V dc
(user supplied)
1761-CBL-AP00
or
1761-CBL-PM02
APS
1747-CP3
or
1761-CBL-AC00
PC to port 1
or port 2
1761-CBL-AP00
or
1761-CBL-PM02
MicroLogix 1000 (Series C or later discrete and all analog)



 


AIC+
(1761-NET-AIC)


DB-9 RS-232 port

mini-DIN 8 RS-232 port

DH-485 port
DF1 Isolated Modem Connection
24V dc
(Not needed in this configuration
since the MicroLogix 1000 provides
power to the AIC+ via port 2.)
User supplied cable
MicroLogix 1000
Modem
1761-CBL-AM00
or
1761-CBL-HM02




Selection Switch Up
AIC+
(1761-NET-AIC)