Rockwell Automation 1761-HHP-B30 MicroLogix 1000 with Hand-Held Programmer (HHP) - Manual (Page 474)

Appendix E
Application Example Programs
E–31
Rung 2:6
If the high-speed counter reached its high preset of 350 (indicates that
the holding area reached maximum capacity), it would energize O:0/0,
shutting down the filling operation. Before re-starting the filler, allow
the packer to empty the holding area until it is about 1/3 full.
| HSC Interr Fill Stop |
| due to |
| High Preset |
| |
| C5:0 +LES–––––––––––––––+ O:0 |
|––––] [–––––+LESS THAN +––––––––––––––––––––––+––––(U)–––––+–|
| IH |Source A C5:0.ACC| | 0 | |
| | 0| | | |
| |Source B 150| | | |
| | | | | |
| +––––––––––––––––––+ | | |
| | HSC Interr | |
| | due to | |
| | High Prest | |
| | | |
| | C5:0 | |
| +––––(U)–––––+ |
| IH |
Rung 2:7
| |
|–––––––––––––––––––––––––––––––––+END+–––––––––––––––––––––––––––––––|
| |
Data Table
Addresses Data (Radix=Decimal)
N7:0 1 1 350 0 0