2 configuring the ac line parameters, P.306), P.307) – Rockwell Automation FlexPak 3000 Digital DC Drive Version 4.3 User Manual
Page 18
3-2
FlexPak 3000 DC Drive Software Reference
3.2
Configuring the AC Line Parameters
In addition to performing Quick Start, you might need to configure the AC line
parameters for your application. Generally, you only need to configure these
parameters if the default values for these parameters are incorrect for your application.
These parameters should be configured before completing Quick Start. See the
OIM
manual for information on Quick Start.
NOMINAL
AC
LINE
FREQ
(P.306)
The nominal AC line
frequency (typically
50 or 60 Hz).
Parameter Range:
48 to 62 Hz
Default Setting:
60 Hz
Parameter Type:
Configurable
OIM Menu Path(s):
Current Minor Loop (
CML
) - Three Phase
AC Line
NOMINAL
AC
LINE
VOLTS
(P.307)
The nominal AC line
RMS
voltage.
Parameter Range:
200 to 575 VAC
Default Setting:
230 VAC
Parameter Type:
Configurable
OIM Menu Path(s):
Current Minor Loop (
CML
) - Three Phase
AC Line