3 (p.497), 4 (p.498) – Rockwell Automation FlexPak 3000 Digital DC Drive Version 4.3 User Manual
Page 29
Configuring the Speed Reference
4-9
Figure 4.3 – MOP Block Diagram
DIG
IN
3 (P.497)
The state of digital
input 3 (terminal 62
on the I/O Expansion
kit), which is the
MOP
decrement input.
Parameter Range:
ON
OFF
Default Setting:
n/a
Parameter Type:
Output
OIM Menu Path(s):
Input/Output - Digital I/O
The input is
ON
when +24VDC is applied for more than 10 msec. It is
OFF
when
0VDC is applied.
DIG
IN
4 (P.498)
The state of digital
input 4 (terminal 63
on the I/O Expansion
kit), which is the
MOP
increment input.
Parameter Range:
ON
OFF
Default Setting:
n/a
Parameter Type:
Output
OIM Menu Path(s):
Input/Output - Digital I/O
The input is
ON
when +24VDC is applied for more than 10msec. It is
OFF
when
0VDC is applied.
To Figure 4.2, Speed
Reference Source
Select Block Diagram
To Figure 4.2, Speed
Reference Source
Select Block Diagram
* Default Selection