Rockwell Automation FlexPak 3000 Digital DC Drive Version 4.3 - Manual (Page 90)

8-6 FlexPak 3000 DC Drive Software Reference
FIELD DELTA (P.588)
The field firing angle
in degrees. Parameter Range: 0 to 180 DEGREE
Default Setting: n/a
Parameter Type: Output
OIM Menu Path(s): Field - Field Current Regulator - Field Loop Test
Points
FIELD FEEDBACK
(P.589)
Motor field current
feedback signal after
scaling and gain. Parameter Range: +/- MOTOR HOT FLD AMPS
Default Setting: n/a
Parameter Type: Output
OIM Menu Path(s): Field - Field Current Regulator - Field Loop Feedback
Scaling
Field - Field Current Regulator - Field Loop Test
Points
FIELD PI LEAD FREQ (P.515)
Lead frequency for
the field current
PI
block.
Parameter Range: 0 to 282.70 RAD / S
Default Setting: 1.50 rad/s
Parameter Type: Tunable
OIM Menu Path(s): Field - Field Current Regulator - Field Loop Tuning
FIELD PI PROP GAIN (P.514)
Proportional gain
setting for the field
current
PI block.
Parameter Range: 0.10 to 128.00
Default Setting: 0.50
Parameter Type: Tunable
OIM Menu Path(s): Field - Field Current Regulator - Field Loop Tuning