Rockwell Automation FlexPak 3000 Digital DC Drive Version 4.3 - Manual (Page 188)

Index-2 FlexPak 3000 DC Drive Software Reference
configuration
AC line parameter, 3-2
AC or DC analog tachometer feedback, 5-6
analog auto speed reference, 4-4
analog manual speed reference, 4-6
armature voltage feedback, 5-3
automatic field weakening, 8-8
enhanced field supply, 8-4
field
current regulated supply, 8-5
economy, 8-2
supply, 8-1
initial drive, 3-1
jog, 4-25
metering outputs, 7-1
network, 10-1
speed reference, 4-8
pulse encoder feedback, 5-9
serial speed reference, 4-8
speed loop, 5-1
current limits, 5-14
lead/lag, 5-11
speed reference, 4-1
ramp, 4-18
source block, 4-2
control source, 3-1
affect on reference, 4-2
CONTROL SOURCE SELECT , 3-1
CONTROL SOURCE SELECT (P.000), 3-1
CS3000 software, 4-8
CT TURNS RATIO (P.010), 6-8
CURRENT COMPOUND TP (P.293), 4-28
CURRENT COMPOUNDING (P.209), 4-28
current limit stop sequencing, 2-4
current minor loop
See CML
D
DC analog tachometer feedback block diagram, 5-6
DECELERATION TIME (P.002), 4-19
DeviceNet
Interface, 10-1
parameters, 10-7
DEVNET POLL MSG TYPE (P.913), 10-7
DIG IN 0 (P.490), 4-25, 9-3
DIG IN 0 SELECT (P.428), 4-26, 9-3
DIG IN 1 (P.495), 4-11
DIG IN 2 (P.496), 4-12
DIG IN 3 (P.497), 4-9
DIG IN 4 (P.498), 4-9
DIG IN 5 (P.499), 9-4
DIG OUT 1 CONTACT TYP (P.410), 11-2
DIG OUT 1 SELECT (P.409), 11-3
DIG OUT 2 CONTACT TYP (P.412), 11-3
DIG OUT 2 SELECT (P.411), 11-4
digital outputs
block diagram, 11-2
setting parameters, 11-2
DRAW PERCENTAGE OUT (P.196), 4-14
drive
checking information, 13-23
current transformer turns ratio, 6-9
description, 1-2
initial configuration, 3-1
sequencing, 2-1
E
ENHANCED FLD VOLT ADJ (P.500), 8-4
F
fault codes, 13-1 to 13-9
FEEDBACK SELECT (P.200), 5-3
field
economy, 8-2
supply, 8-1
current regulated, 8-5
enhanced, 8-4
weakening, automatic, 8-8
FIELD AUTO WEAKEN (P.517), 8-9
FIELD DELTA (P.588), 8-6
FIELD DELTA HIGH LIM (P.587), 8-9
FIELD ECONOMY ACTIVE (P.599), 8-2
FIELD ECONOMY DELAY (P.501), 8-3
FIELD ECONOMY REF (P.511), 8-3
FIELD FEEDBACK (P.589), 8-6
FIELD LOSS THRESHOLD (P.512), 8-9
FIELD PI LEAD FREQ (P.515), 8-6
FIELD PI PROP GAIN (P.514), 8-6
FIELD REF REGISTER (P.513), 8-3
FIELD REF SELECT (P.521), 8-7
FIELD REFERENCE (P.590), 8-7
FLD CURRENT REGULATOR (P.586), 8-1
FLD FEEDBACK GAIN ADJ (P.516), 8-7
FLD WEAKEN LEAD FREQ (P.520), 8-10
FLD WEAKEN PROP GAIN (P.519), 8-10
FLD WEAKEN THRESHOLD (P.518), 8-10
FREQ IN (P.491), 11-10
FREQ IN FULL SCALE (P.424), 11-10
FREQ IN ZERO (P.423), 11-11
FREQ OUT FULL SCALE (P.427), 11-11
FREQ OUT SELECT (P.425), 11-11
FREQ OUT ZERO (P.426), 11-12