P.197), P.109), P.107) – Rockwell Automation FlexPak 3000 Digital DC Drive Version 4.3 User Manual
Page 35
Configuring the Speed Reference
4-15
TRIM
OUTPUT
(P.197)
Actual signal used to
trim the selected
speed loop reference
signal.
Parameter Range:
n/a
Default Setting:
n/a
Parameter Type:
Output
OIM Menu Path(s):
Drive Reference - Drive Reference Test Points
TRIM
RANGE
(P.109)
Uses the selected
trim reference signal
to generate
DRAW
PERCENTAGE
OUT
(P.196). Determines
how much the trim
signal will affect the
drive reference.
Parameter Range:
0.0 to 100.0%
Default Setting:
0.0%
Parameter Type:
Tunable
OIM Menu Path(s):
Drive Reference - Drive Reference Trim
TRIM
REF
REGISTER
(P.107)
Drive register to
manually set the trim
reference value used
by the drive when is
TRIM
REFERENCE
SELECT
(P.108) is set
to
REGISTER
.
Parameter Range:
±100.0%
Default Setting:
0%
Parameter Type:
Tunable
OIM Menu Path(s):
Drive Reference - Drive Reference Trim