Eo (echo), Setting, N=0 or 1. 0 turns echo off, 1 turns echo on – Yaskawa LEGEND-MC User Manual
Page 117
Advertising
107
LEGEND-MC User’s Manual
EO (Echo)
[Setting]
DESCRIPTION:
The EO command turns the echo on or off. If the echo is off, characters input to the serial port or Ethernet
will not be echoed back.
ARGUMENTS: EO n
where
n=0 or 1. 0 turns echo off, 1 turns echo on.
USAGE:
EXAMPLES:
While Moving
Yes
Default Value
1
In a Program
Yes
Default Format
1
Command Line
Yes
Can be Interrogated
No
Used as an Operand
No
Distributed Control
Use SA
EO 0
Turns echo off
EO 1
Turns echo on
Advertising