Bv (burn variables), General – Yaskawa LEGEND-MC User Manual
Page 84
Advertising
74
LEGEND-MC User’s Manual
BV (Burn Variables)
[General]
DESCRIPTION:
The BV command saves the defined variables and arrays in non-volatile EEPROM memory. This command
typically takes up to 2 seconds to execute and must not be interrupted. If the burn is disrupted by power
failure, a memory checksum error will result. The controller returns a <:> when the Burn variables are
complete.
ARGUMENTS: None
USAGE:
While Moving
No
Default Value
---
In a Program
Yes
Command Line
Yes
Can be Interrogated
No
Used as an Operand
Yes
Distributed Control
Use SA
Advertising