Yaskawa LEGEND-MC - Manual (Page 13)

3
LEGEND-MC User’s Manual
Start-up
Mounting the LEGEND-MC to the LEGEND Amplifier
1. Insert the lower two mounting notches of the LEGEND-MC into the mounting holes at the bottom of the right
side of the LEGEND.
2. Push the LEGEND-MC in the direction indicated by the arrow in the figure below, and insert the upper
mounting notches of the LEGEND-MC into the upper mounting holes on the right side of the LEGEND.
Mounting Orientation
Mount the LEGEND-MC and LEGEND vertically for proper cooling, as shown below. Allow a minimum spacing
of 10mm around the left and right sides and 30mm around the top and bottom of the LEGEND-MC/LEGEND
unit.