Bp (burn program), General – Yaskawa LEGEND-MC User Manual
Page 83
Advertising
73
LEGEND-MC User’s Manual
BP (Burn Program)
[General]
DESCRIPTION:
The BP command saves the application program in non-volatile EEPROM memory. This command
typically takes up to 10 seconds to execute and must not be interrupted. If the burn is disrupted by power
failure, a memory checksum error will result. The controller returns a <: >when the Burn is complete.
ARGUMENTS: None
USAGE:
While Moving
No
Default Value
---
In a Program
No
Command Line
Yes
Can be Interrogated
No
Used as an Operand
No
Distributed Control
Use SA
Advertising