Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 1007)

Brocade Mobility RFS Controller System Reference Guide 995
53-1003099-01
16
7. The Web Activity field display by default with the following content trended in the selected
interval:
8. Select Traffic.
FIGURE 4 System Analytics - Client Traffic screen
9. Refer to the following client Traffic analytics trended at the selected interval:
10. Select RF.
Bandwidth Displays the client’s Web activity bandwidth utilization in Bits per second (Bps) in either chart or table
format.
URL Visited Displays URLs visited by a selected client in either chart or table format. Either display contains the Web
destination URL and the number of times the URL was accessed by the client.
Search Terms Displays terms used as search Web search criteria by connected clients in either chart or table format.
Either display contains the search item and the number of times the term was searched by the client.
Tx/Rx Bps Displays the Bits per second (Bps) speed of data both transmitted from and received at the listed client,
in either chart or table format.
Signal to Noise Ratio Displays the connected client’s signal to noise ratio (SNR) and a time stamp of its reporting. A high SNR
could warrant a different Access Point connection to improve performance.
Tx/Rx Rate Displays the connected client’s transmit and receive data rate in either chart or table format.