Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 855)

Brocade Mobility RFS Controller System Reference Guide 843
53-1003099-01
15
2. Select the Wireless Controller node from the left navigation pane.
3. Select Dot1x from the left-hand side of the UI.
FIGURE 65 Wireless Controller – Dot1x screen
4. Refer to the following Dot1xAuth statistics:
5. Review the following Dot1x Auth Ports utilization information:
AAA Policy Lists the AAA policy currently being utilized for authenticating user requests.
Guest Vlan Control Lists whether guest VLAN control has been allowed (or enabled). This is the VLAN traffic is bridged on if
the port is unauthorized and guest VLAN globally enabled. A green checkmark designates guest VLAN
control as enabled. A red X defines guest VLAN control as disabled.
System Auth Control Lists whether Dot1x authorization is globally enabled for the controller or service platform. A green
checkmark designates Dot1x authorization globally enabled. A red X defines Dot1x as globally disabled.
Name Lists the controller or service platform ge ports subject to automatic connection and authentication
using Dot1x.
Auth SM Lists whether Dot1x authentication is forced over the listed port.
Auth VLAN Lists the numeric VLAN ID used as a virtual interface for authentication requests over the listed port.
BESM Lists whether an authentication request is pending on the listed port.