Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 82
70
Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
NOTE
Port mirroring is not supported on NX4500 or NX6500 models, as they only utilize GE ports 1 - 2.
Additionally, port mirroring is not supported on uplink (up) ports or wired ports on any controller or
service platform model.
To set a NX4524 or NX6524 service platform port mirror configuration:
1. Select the Configuration tab from the Web UI.
2. Select Devices from the Configuration tab.
The Device Configuration screen displays a list of managed devices or peer controllers, service
platforms or Access Points.
3. Select a target device (by double-clicking it) from amongst those displayed within the Device
Configuration screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of
the UI.
4. Select Mirroring from the Device menu options.
FIGURE 17
Port Mirroring screen