Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 334
Advertising
322
Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
6
6. Select OK to update the Smart RF Basic Configuration settings for this policy. Select Reset to
revert to the last saved configuration.
7. Select Channel and Power.
Use the Channel and Power screen to refine Smart RF power settings over both 5 and 2.4
GHz radios and select channel settings in respect to the device channel usage.
FIGURE 40
Smart RF Channel and Power screen
NOTE
The Power Settings and Channel Settings parameters are only enabled when Custom or Medium is
selected as the Sensitivity setting from the Basic Configuration screen.
Advertising