Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 252)

240 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
FIGURE 121 Advanced Profile MINT screen - VLAN tab
16. The VLAN tab displays the VLAN, Routing Level, Link Cost, Hello Packet Interval and Adjacency
Hold Time devices use to securely communicate amongst one another. Select Add to create a
new VLAN link configuration or Edit to override an existing MINT configuration.
FIGURE 122 Advanced Profile MINT screen - VLAN tab
17. Set the following VLAN parameters to complete the MINT configuration:
VLAN Define a VLAN ID from 1 - 4,094 used by peers for interoperation when supporting the MINT
protocol.
Routing Level Use the spinner control to define or override a routing level of either 1 or 2.
Link Cost Use the spinner control to define or override a link cost from 1 - 10,000. The default value is 100.
Hello Packet Interval Set or override an interval in either Seconds (1 - 120) or Minutes (1 - 2) for the transmission of hello
packets. The default interval is 15 seconds.
Adjacency Hold Time Set or override a hold time interval in either Seconds (2 - 600) or Minutes (1 - 10) for the
transmission of hello packets. The default interval is 46 seconds.