Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 975)

Brocade Mobility RFS Controller System Reference Guide 963
53-1003099-01
15
• NTP Association
NTP Status
Network Time
To view the Network Time statistics of an Access Point:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select Network Time.
FIGURE 157 Access Point - NTP Status screen
The NTP Status tab displays by default with the following information:
Clock Offset Displays the time differential between the Access Point’s time and its NTP resource’s time.
Frequency Indicates the SNTP server clock’s skew (difference) for the Access Point.
Leap Indicates if a second is added or subtracted to SNTP packet transmissions, or if transmissions are
synchronized.
Precision Displays the precision of the time clock (in Hz). The values that normally appear in this field range from
-6, for mains-frequency clocks, to -20 for microsecond clocks.
Reference Time Displays the time stamp the Access Point’s clock was last synchronized or corrected.
Reference Displays the address of the time source the Access Point is synchronized to.