Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 596)

584 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
10
In the Configuration section define the following LDAP server parameters:
In the LDAP Server Options section use the + Add Row button to add an LDAP server to the list or
double-click on an existing LDAP server entry to edit it. When adding or editing the LDAP server
options define the following parameters:
Click on the Roles tab. If no policies have been created, a default wireless client role policy can be
applied. The Roles screen lists existing policies. Any of these existing policies can be selected and
edited or a new role can be added.
LDAP Query If LDAP attributes are enabled for the selected wireless client role policy, select an LDAP query mode of
either Internal (Self) or Through Wireless Controller. Select Internal (Self) to use local LDAP server
resources configured in the LDAP Server Options.
Dead Period When using an external LDAP server, select the Dead Period between 60 and 300 seconds. The Dead
Period is the timeout value before the system will attempt to rebind with the LDAP server.
Timeout When using an external LDAP server, select a Timeout value to specify how long of a delay between
request and responses before LDAP bind and queries will be timed out.
ServerId When adding or editing an LDAP server entry, enter the LDAP server ID as either 1 or 2.
Host When adding or editing an LDAP server entry, enter the LDAP server's fully qualified domain name or IP
address in the Host field
Bind DN When adding or editing an LDAP server entry, enter the LDAP server's bind distinguished name in the
Bind DN field.
Base DN When adding or editing an LDAP server entry, enter the LDAP server's base distinguished name in the
Base DN field.
Bind Password When adding or editing an LDAP server entry, enter the password for bind. Click the Show button to
display the password.
Port When adding or editing an LDAP server entry, enter the LDAP server port number. To select from a list of
frequently used services and their corresponding port numbers, use the drop-down menu and select a
service.