Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 356)

344 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
6
Refer to the Basic Configuration field to set the following:
Refer to the Operator Network Parameters field to define the following:
Select OK when completed to update the passpoint policy settings. Select Reset to revert the
screen back to the last saved configuration.
Access Network Type Use the drop-down menu to select the network access method for this passpoint policy.
Access network types include:
private – General access to a private network hotspot (default setting)
private-guest – Access to a private network hotspot with guest services
chargeable-public – Access to a public hotspot with billable services
personal-device – Access to a hotspot for personal devices such as wireless routers
emergency services – Dedicated network hotspot access for emergency services only
Operator Name Provide the unique name of the administrator or operator responsible for the configuration and
management or the hotspot. The name cannot exceed 64 characters.
Venue Name Enter the Venue Name and address. The operator can configure an Access Point to describe the
location of the hotspot. This information typically includes the name and address of the deployment
location where the hotspot is located. Enter the name and address configured for the Access Point
hotspot. The name cannot exceed 252 characters.
Venue Name Lang Hotspot operators can list venue names in multiple languages. Select the + Add Row button to add
venue name languages. Enter the two or three character ISO-14962-1997 encoded string that
defines the language used in the Code field. Enter the name of the venue in the Name field. The
name cannot exceed 252 characters.
Operator Name Lang Operator names can be listed in multiple languages. Select + Add Row to add operator name
languages. Enter the two or three character ISO-14962-1997 encoded string defining the language
used in the Code field. Enter the name of the operator in the Name field. The name cannot exceed
252 characters.
PLMNID Operators providing mobile and Wi-Fi hotspot services have a unique Public Land Mobile Network
(PLMN) ID. Select the + Add Row button to add PLMN information for operators responsible for the
configuration and operation of the hotspot. Provide a Description for the PLMN not exceeding 64
characters.
Enter a three digit Mobile Country Code (MCC) and two digit Mobile Network Code (MNC) for the
PLMN ID. The MCC identifies the region and country where the hotspot is deployed. The MNC
identifies the operator responsible for the configuration and management of the hotspot by PLMN
ID and country. Both the MCC and MNC fields are mandatory.