Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 434)

422 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
16. Refer to the Preferred Peer Device table to add mesh peers. For each peer added, enter its
MAC Address and a Priority between 1 and 6. The lower the priority number the higher priority
it'll be given when connecting to mesh infrastructure.
17. Select the + Add Row button to add preferred peer devices for the radio to connect to in mesh
mode.
18. Select the Advanced Settings tab.
FIGURE 25 Access Point Radio - Advanced Settings screen