Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) User Manual
Page 172
160
Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
FIGURE 66
OSPF Interface Settings screen
17. Review the following Interface Settings:
18. Select the Add button to define a new set of virtual interface basic settings, or Edit to update
the settings of an existing virtual interface configuration.
Name
Displays the name defined for the interface configuration.
Type
Displays the type of interface.
Description
Lists each interface’s 32 character maximum description.
Admin Status
Displays whether admin status privileges have been enabled or disabled for the OSPF
route’s virtual interface connection.
VLAN
Lists the VLAN IDs set for each listed OSPF route virtual interface.
IP Address
Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero
config and DHCP can be used to generate route addresses, or a primary and
secondary address can be manually provided.