Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 76)

64 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
FIGURE 13 Certificate Management - Import New RSA Key screen
8. Define the following parameters required for the Import of the RSA key:
Key Name Enter the 32 character maximum name assigned to identify the RSA key.
Key Passphrase Define the key used by both the controller or service platform and the server (or
repository) of the target RSA key. Select the Show
to expose the actual characters used
in the passphrase. Leaving the Show unselected displays the passphrase as a series of
asterisks “*”.
URL Provide the complete URL to the location of the RSA key. If needed, select Advanced to
expand the dialog to display network address information to the location of the target
key. The number of additional fields that populate the screen is dependent on the
selected protocol.
Advanced / Basic Select either the Advanced or Basic link to switch between a basic URL and an
advanced location to specify key location.
Protocol Select the protocol used for importing the target key. Available options include:
tftp
ftp
sftp
http
cf
usb1-4
Port Use the spinner control to set the port. This option is not valid for cf and usb1-4.
Host Provide a text string hostname or numeric IP address of the server used to import the
RSA key. This option is not valid for cf and usb1-4.
Path/File Specify the path to the RSA key. Enter the complete relative path to the key on the
server.