Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 368)

356 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
7
FIGURE 8 AAA Policy - Settings screen
14. Set the Protocol for MAC, Captive-Portal Authentication.
The authentication protocol Password Authentication Protocol (PAP) or Challenge Handshake
Authentication Protocol (CHAP) when the server is used for any non-EAP authentication. PAP is the
default setting.
15. Set the following RADIUS Accounting settings:
Accounting Packet Type Set the RADIUS Accounting request packet type. Options include Stop Only, Start/Stop and
Start/Interim/Stop. Start/Stop is the default setting
Request Interval Set the periodicity of the interim accounting requests. The default is 30 minutes.
Accounting Server
Preference Select the server preference for RADIUS accounting. The options include:
Prefer Same Authentication Server Host - Uses the authentication server host name as the host
used for RADIUS accounting. This is the default setting.
Prefer Same Authentication Server Index - Uses the same index as the authentication server for
RADIUS accounting.
Select Accounting Server Independently - Allows users to specify a RADIUS accounting server
separate from the RADIUS authentication server.