Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 847)

Brocade Mobility RFS Controller System Reference Guide 835
53-1003099-01
15
To view OSPF state statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select OSPF from the left-hand side of the UI.
4. Select the OSPF State tab.
FIGURE 59 Wireless Controller - OSPF State tab
The OSPF State tab describes the following:
5. Select the Refresh button to update the statistics counters to their latest values.
OSPF state Displays the OSPF link state amongst neighbors within the OSPF topology. Link state information is
maintained in a link-state database (LSDB) which is a tree image of the entire network topology. Identical
copies of the LSDB are periodically updated through flooding on all OSPF supported nodes. Flooding is the
part of the OSPF protocol that distributes and synchronizes the link-state database between OSPF routers.
OSPF ignore state
count Lists the number of times state requests have been ignored between the controller or service platform and its
peers within this OSPF supported broadcast domain.
OSPF ignore state
monitor timeout Displays the timeout that, when exceeded, prohibits the controller or service platform from detecting changes
to the OSPF link state.
OSPF max ignore
state count Displays whether an OSPF state timeout is being ignored and not utilized in the transmission of state update
requests amongst neighbors within the OSPF topology.
OSPF max routes States the maximum number of routes negotiated amongst neighbors within the OSPF topology.
OSPF routes
received Lists the routes received and negotiated amongst neighbors within the OSPF topology.