Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 815)

Brocade Mobility RFS Controller System Reference Guide 803
53-1003099-01
15
• AP Adoption History
• Pending Adoptions
To view device adoption statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select Adoption > Adopted Devices from the left-hand side of the UI.
FIGURE 36 Wireless Controller - Adopted APs screen
The Adopted Devices screen displays the following:
Device Displays the name assigned to the adopted device by the management software. The Access Point
name displays as a link that can be selected to display configuration and network address
information in greater detail.
Type Lists the model type of each Access Point managed by the selected controller or service platform
(the controller or service platform listed in the Adopter Hostname column).
RF Domain Name Displays the RF Domain memberships of each listed adopted device.
Model Number Displays the controller (Brocade Mobility RFS4000, Brocade Mobility RFS6000, Brocade Mobility
RFS7000.) or service platform (NX4500, NX4524, NX6500, NX6524 or NX9000 series) model
type.
Status Lists whether an adopted Access Point has been configured (provisioned) by its connected Access
Point or service platform.
Errors Lists any errors encountered when the each listed Access Point was adopted by the controller or
service platform.
Adopter Hostname Lists the hostname assigned to the adopting controller or service platform.
Adoption Time Displays a timestamp for each listed Access Point reflecting when the device was adopted by the
controller or service platform.
Startup Time Lists the time the adopted device was last started up and detected on the network.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.