Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 651)

Brocade Mobility RFS Controller System Reference Guide 639
53-1003099-01
11
Creating RADIUS Groups
To create a RADIUS group:
1. Select Configuration tab from the main menu.
2. Select the Services tab from the Configuration menu.
3. Select RADIUS > Groups from the Configuration > Services menu.
4. Click the Add to create a new RADIUS group, Edit to modify the configuration of an existing
group or Delete to permanently remove a selected group.
FIGURE 17 RADIUS Group Policy Add screen
5. Define the following Settings to define the user group configuration:
RADIUS Group Policy If creating a new RADIUS group, assign it a name to help differentiate it from others with similar
configurations. The name cannot exceed 32 characters or be modified as part of a RADIUS group edit
process.
Guest User Group Select this option to assign only guest access and temporary permissions to the local RADIUS server.
Guest user groups cannot be made management groups with unique access and role permissions.
VLAN Select this option to assign a specific VLAN to this RADIUS user group. Ensure Dynamic VLAN
assignment (single VLAN) is enabled for the WLAN in order for the VLAN assignment to work properly.
WLAN SSID Assign a list of SSIDs users within this RADIUS group are allowed to associate with. An SSID cannot
exceed 32 characters. Assign WLAN SSIDs representative of the configurations a guest user will need
to access. The parameter is not available if this RADIUS group is a management group.
Rate Limit from Air Select the checkbox to set the rate limit for clients within the RADIUS group. Use the spinner to set
value from 100-1,000,000 kbps. Setting a value of 0 disables rate limiting.