Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 118)

106 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
7. Refer to the following to review existing port channel configurations and status to determine
whether a parameter requires an override:
8. To edit or override the configuration of an existing port channel, select it from amongst those
displayed and select the Edit button. The port channel Basic Configuration screen displays by
default.
FIGURE 37 Profile Overrides - Port Channels Basic Configuration screen
Name Displays the port channel’s numerical identifier assigned when it was created. The numerical name
cannot be modified as part of the edit process.
Type Displays whether the type is port channel.
Description Lists a a short description (64 characters maximum) describing the port channel or differentiating it
from others with similar configurations.
Admin Status A green check mark defines the listed port channel as active and currently enabled with the profile. A
red “X” defines the port channel as currently disabled and not available for use. The interface status
can be modified with the port channel configuration as required.