Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 133)

Brocade Mobility RFS Controller System Reference Guide 121
53-1003099-01
5
12. Select the WLAN Mapping/Mesh Mapping tab.
FIGURE 45 Profile Overrides - Access Point Radio WLAN Mapping tab
13. Refer to the WLAN/BSS Mappings field to set or override WLAN BSSID assignments for an
existing Access Point deployment.
Administrators can assign each WLAN its own BSSID. If using a single-radio access point, there
are 8 BSSIDs available. If using a dual-radio access point there are 8 BSSIDs for the
802.11b/g/n radio and 8 BSSIDs for the 802.11a/n radio.
14. Select Advanced Mapping to enable WLAN mapping to a specific BSS ID.
15. Select OK to save the changes and overrides to the WLAN Mapping. Select Reset to revert to
the last saved configuration.
16. Select the Legacy Mesh tab.