Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 905)

Brocade Mobility RFS Controller System Reference Guide 893
53-1003099-01
15
Adopted APs
Adoption
The Adopted APs screen lists Access Points adopted by the selected Access Point, their RF Domain
memberships and network service information.
To view adopted Access Point statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Expand the Adoption menu item.
4. Select Adopted APs.
FIGURE 103 Access Point - Adopted APs screen
The Adopted APs screen displays the following:
Access Point Displays the name assigned to the adopted Access Point as part of its device configuration.
Type Lists the each listed Access Point type adopted by this Access Point.
RF Domain Name Displays each Access Point’s RF Domain membership. An Access Point can only share RF Domain
membership with other Access Points of the same model.
Model Number Displays each listed Access Point’s numeric model ( Brocade Mobility 6511 Access Point etc.).
Status Displays each listed Access Point’s configuration status to help determine its service role.
Errors Lists any configuration errors that may be hindering a clean adoption.