Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 32)

20 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
3
• EAP Authentication and WPA2 Encryption
Select Next. The wizard displays the System Information screen to set device deployment,
administrative contact and system time information. The system time can either be set manually or
be supplied by a dedicated Network Time Protocol (NTP) resource.
FIGURE 8 Initial Setup Wizard - System Information
Refer to the Country and Time Zone field to set the following deployment information:
• Password - Enter and confirm a system password used to login into the controller or
service platform on subsequent login attempts.Changing the default system password is
strongly recommended to secure the proprietary configuration data maintained on the
controller or service platform.
• Location - Define the location of the controller or service platform deployment.
• Contact - Specify the contact information for the administrator. The credentials provided
should accurately reflect the individual responding to service queries.
• Country - Select the country where the controller or service platform is deployed. The
controller or service platform prompts for the correct country code on the first login. A
warning message also displays stating an incorrect country setting may result in illegal
radio operation. Selecting the correct country is central to legal operation. Each country
has its own regulatory restrictions concerning electromagnetic emissions and the
maximum RF signal strength that can be transmitted.