Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 410)

398 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
FIGURE 10 Ethernet Ports - Spanning Tree screen
19. Define the following PortFast parameters for the port’s MSTP configuration:
20. Set the following MSTP Configuration parameters:
Enable PortFast Select the check box to enable fast transitions and drop-down menus for both the Enable Portfast BPDU
Filter and Enable Portfast BPDU guard options for the port. This setting is disabled by default.
PortFast BPDU Filter Select enable to invoke a BPDU filter for this portfast enabled port. Enabling the BPDU filter feature
ensures this PortFast enabled port does not transmit or receive BPDUs.
PortFast BPDU Guard Select enable to invoke a BPDU guard for this portfast enabled port. Enabling the BPDU Guard feature
means this portfast-enabled port will shutdown on receiving a BPDU. Thus, no BPDUs are processed.
Enable as Edge Port Select the check box to define this port as an edge port. Use an edge (private) port to isolate devices
and prevent connectivity over this port.