Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 944)

932 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select Dot1x from the left-hand side of the UI.
FIGURE 132 Access Point – Dot1x screen
4. Refer to the following Dot1xAuth statistics:
AAA Policy Lists the AAA policy currently being utilized for authenticating user requests.
Guest Vlan Control Lists whether guest VLAN control has been allowed (or enabled). This is the VLAN traffic is bridged on if
the port is unauthorized and guest VLAN globally enabled. A green checkmark designates guest VLAN
control as enabled. A red X defines guest VLAN control as disabled.
System Auth Control Lists whether Dot1x authorization is globally enabled for the Access Point. A green checkmark
designates Dot1x authorization globally enabled. A red X defines Dot1x as globally disabled.