Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 230)

218 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
Additionally, an administrator can define a profile with unique configuration file and device
firmware upgrade support. In a clustered environment, these operations can be performed on one
controller or service platform, then propagated to each member of the cluster and onwards to
devices managed by each cluster member.
To define or override a profile’s management configuration:
1. Select Devices from the Configuration tab.
The Device Configuration screen displays a list of devices or peer controllers, service platforms
or Access Points.
2. Select a target device (by double-clicking it) from amongst those displayed within the Device
Configuration screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of
the UI.
3. Select Profile Overrides from the Device menu to expand it into sub menu options.
4. Expand the Management menu item and select Settings.
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override go to the Basic Configuration section of the device and click the Clear
Overrides button. This removes all overrides from the device.