Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 933)

Brocade Mobility RFS Controller System Reference Guide 921
53-1003099-01
15
FIGURE 123 Access Point - OSPF Network Routes tab
Network routes support more than two routers, with the capability of addressing a single physical
message to all attached routers (broadcast). Neighboring routers are discovered dynamically using
OSPF hello messages. This use of the hello protocol takes advantage of broadcast capability. An
OSPF network route makes further use of multicast capabilities, if they exist. Each pair of routers
on the network is assumed to communicate directly.
The network tab displays the network name, impacted OSPF area, cost, destination and path type.
7. Select the Router Routes tab.