Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 467)

Brocade Mobility RFS Controller System Reference Guide 455
53-1003099-01
8
FIGURE 45 OSPF Interface Settings screen
16. Review existing Interface Settings using the following:
17. Select the Add button to define a new set of virtual interface basic settings, or Edit to update
the settings of an existing virtual interface configuration.
Name Displays the name defined for the interface configuration.
Type Displays the type of interface.
Description Lists each interface’s 32 character maximum description.
Admin Status Displays whether administrative privileges have been enabled (with a green checkmark) or
disabled (defined by a red X) for the OSPF route’s virtual interface connection.
VLAN Lists the VLAN IDs set for each listed OSPF route virtual interface.
IP Address Displays the IP addresses defined as virtual interfaces for dynamic OSPF routes. Zero config
and DHCP can be used to generate route addresses, or a primary and secondary address
can be manually provided.