Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 164)

152 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
Overriding a Profile’s Routing Configuration
Overriding a Profile’s Network Configuration
Routing is the process of selecting IP paths within the wireless network to route traffic. Use the
Routing screen to set Destination IP and Gateway addresses enabling the assignment of static IP
addresses for requesting clients without creating numerous host pools with manual bindings. This
eliminates the need for a long configuration file and reduces the resource space required to
maintain address pools.
To create or override a profile’s static routes:
1. Select Devices from the Configuration tab.
The Device Configuration screen displays a list of managed devices or peer controllers, service
platforms or Access Points.
2. Select a target device (by double-clicking it) from amongst those displayed within the Device
Configuration screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of
the UI.
3. Select Profile Overrides from the Device menu to expand it into sub menu options.
4. Select Network to expand its sub menu options.
5. Select Routing.
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override go to the Basic Configuration section of the device and click the Clear
Overrides button. This removes all overrides from the device.