Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 951)

Brocade Mobility RFS Controller System Reference Guide 939
53-1003099-01
15
FIGURE 137 Access Point - Network DHCP Options screen
The DHCP Options screen displays the following:
Cisco Discovery Protocol
Network
The Cisco Discovery Protocol (CDP) is a proprietary Data Link Layer network protocol implemented
in Cisco networking equipment and used to share information about network devices.
To view an Access Point’s CDP statistics:
1. Select the Statistics menu from the Web UI.
2. Select System from the navigation pane (on the left-hand side of the screen). Expand a RF
Domain, select a controller or service platform, and select one of its connected Access Points.
3. Select Network and expand the menu to reveal its sub menu items.
Server Information Displays the DHCP server hostname used on behalf of the Access Point.
Image File Displays the image file name. BOOTP or the bootstrap protocol can be used to boot diskless clients. An
image file is sent from the boot server. The image file contains the image of the operating system the
client will run. DHCP servers can be configured to support BOOTP.
Configuration Displays the name of the configuration file on the DHCP server.
Legacy Adoption Displays historical device adoption information on behalf of the Access Point.
Adoption Displays adoption information on behalf of the Access Point.
Refresh Select the Refresh button to update the screen’s statistics counters to their latest values.