Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 774)

762 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
15
RF Statistics
To view the RF Domain radio statistics:
1. Select the Statistics menu from the Web UI.
2. Select a RF Domain from under the System node on the top, left-hand side, of the screen.
3. Expand Radios from the RF Domain menu and select RF Statistics.
FIGURE 16 RF Domain - Radio RF Statistics screen
Channel Current
(Config) Displays the current channel each listed RF Domain member Access Point radio is broadcasting on.
Configured Channel Lists each radio’s defined operating channel to help assess if the radio is no longer transmitting on its
configured channel. Neighbor radios are often required to assist non-functioning peers in the same
coverage area.
Power Current
(Config) Displays the current power level the radio is using for its transmissions.
Configured Power Lists each radio’s defined transmit power to help assess if the radio is no longer transmitting using its
assigned power. Neighbor radios are often required to increase power to compensate for failed peer
radios in the same coverage area.
Clients Displays the number of clients currently connected to each listed RF Domain member Access Point
radio. BR1220, BR71XX, BR1240 models can support up to 256 clients per radio. Brocade Mobility
6511 Access Point model can support up to 128 clients per radio.
Refresh Select the Refresh button to update the statistics counters to their latest values.