Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 85)

Brocade Mobility RFS Controller System Reference Guide 73
53-1003099-01
5
6. Refer to the Basic Configuration field to review the basic settings defined for the target device’s
RF Domain configuration, and optionally assign/remove overrides to and from specific
parameters.
7. Refer to the Smart RF section to configure Smart RF policy and dynamic channel settings.
8. Refer to the Smart Scan section to configure Smart RF policy and dynamic channel settings.
9. Select the Create icon to define a new Smart RF policy that can be applied to the RF Domain,
or select the Edit icon to modify or override an existing Smart RF policy.
For an overview of Smart RF and instructions on how to create a Smart RF policy that can be
used with a RF Domain, see
Smart RF Policy .
10. Use the WIPS Policy drop-down menu to apply a WIPS policy to the RF Domain.
The Wireless Intrusion Protection System (WIPS) provides continuous protection against
wireless threats and act as an additional layer of security complementing wireless VPNs and
encryption and authentication policies. Controllers and service platforms support WIPS
through the use of dedicated sensor devices, designed to actively detect and locate
unauthorized AP devices. After detection, they use mitigation techniques to block devices using
manual termination, air lockdown or port suppression.
11. Select the Create icon to define a new WIPS policy that can be applied to the RF Domain, or
select the Edit icon to modify or override an existing WIPS policy.
For an overview of WIPS and instructions on how to create a WIPS policy that can be used with
a RF Domain, see
Intrusion Prevention .
Location Provide the 64 character maximum deployment location set for the controller or
service platform as part of its RF Domain configuration.
Contact Enter the 64 character maximum administrative contact for the controller or service
platform as part of its RF Domain configuration.
Time Zone Displays the time zone utilized for the RF Domain configuration.
Country Code Displays the country code set for the as part of the RF Domain configuration.
VLAN for Control Traffic Displays the VLAN for Control Traffic setting for the device as part of its RF Domain
configuration.
2.4 GHz Radios Select an override group of channels Smart RF can use for channel compensation
adjustments in the 2.4 GHz band.
5 GHz Radios Select an override group of channels Smart RF can use for channel compensation
adjustments in the 5 GHz band.
Enable Dynamic
Channel Select this option to enable dynamic channel switching for Smart RF radios.
2.4 GHz Channels Select channels from the drop-down menu and click the down arrow to move it to
the list of channels used for 2.4GHz Smart RF radios.
5 GHz Channels Select channels from the drop-down menu and click the down arrow to move it to
the list of channels used for 5GHz Smart RF radios.