Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 664)

652 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
11
FIGURE 26 LDAP Server Add screen
4. Set the following Network address information required for the connection to an external LDAP
server resource:
Redundancy Define whether this LDAP server is a primary or secondary server resource. Primary servers are
always queried for connection first. However, designating at least one secondary server is a
good practice to ensure RADIUS user information is available if a primary server were to become
unavailable.
IP Address Set the IP address of the external LDAP server acting as the data source for the RADIUS server.
Login Define a unique login name used for accessing the remote LDAP server resource. Consider
using a unique login name for each LDAP server provided to increase the security of the
connection to the remote LDAP server.
Port Use the spinner control to set the physical port number used by the RADIUS server to secure a
connection with the remote LDAP server.
Timeout Set an interval from 1 - 10 seconds the local RADIUS server uses as a wait period for a response
from the primary or secondary LDAP server. The default setting is 10 seconds.