Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 416)

404 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
1. Select Configuration > Profiles > Interface.
2. Expand the Interface menu to display its submenu options.
3. Select Port Channels.
The Port Channels screen displays.
FIGURE 14 Port Channels screen
4. Refer to the following to review existing port channel configurations and their current status:
5. To edit the configuration of an existing port channel, select it from amongst those displayed
and select the Edit button. The port channel Basic Configuration screen displays by default.
Name Displays the port channel’s numerical identifier assigned to it when it was created. The numerical name
cannot be modified as part of the edit process.
Type Displays whether the type is a port channel.
Description Lists a a short description (64 characters maximum) describing the port channel or differentiating it
from others with similar configurations.
Admin Status A green checkmark defines the listed port channel as active and currently enabled with the profile. A
red “X” defines the port channel as currently disabled and not available for use. The interface status
can be modified with the port channel configuration as required.