Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 845)

Brocade Mobility RFS Controller System Reference Guide 833
53-1003099-01
15
FIGURE 57 Wireless Controller - OSPF Router Routes tab
An internal (or router) route connects to one single OSPF area. All of its interfaces connect to the
area in which it is located and does not connect to any other area.
8. Select the Refresh button (within any of the four OSPF Routes tabs) to update the statistics
counters to their latest values
OSPF Interface
OSPF
An OSPF interface is the connection between a router and one of its attached networks. An
interface has state information associated with it, which is obtained from the underlying lower level
protocols and the routing protocol itself. A network interface has associated a single IP address and
mask (unless the network is an unnumbered point-to-point network). An interface is sometimes
also referred to as a link.
To view OSPF interface statistics:
1. Select the Statistics menu from the Web UI.
2. Select a Wireless Controller node from the left navigation pane.
3. Select OSPF from the left-hand side of the UI.
4. Select the OSPF Interface tab.