Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 663)

Brocade Mobility RFS Controller System Reference Guide 651
53-1003099-01
11
FIGURE 25 RADIUS Server Policy screen - LDAP tab
2. Refer to the following to determine whether an LDAP server can be used as is, a server
configuration requires creation or modification or a configuration requires deletion and
permanent removal.
3. Click the Add button to add a new LDAP server configuration, Edit to modify an existing LDAP
server configuration or Delete to remove a LDAP server from the list of those available.
Redundancy Displays whether the listed LDAP server IP address has been defined as a primary or secondary
server resource. Designating at least one secondary server is a good practice to ensure RADIUS
resources are available if a primary server were to become unavailable.
IP Address Displays the IP address of the external LDAP server acting as the data source for the RADIUS
server.
Port Lists the physical port number used by the RADIUS server to secure a connection with the
remote LDAP server resource.