Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 404)

392 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
8
3. Select Ethernet Ports.
The Ethernet Ports screen displays configuration, runtime status and statistics regarding the
physical ports on the controller or service platform.
FIGURE 7 Ethernet Ports screen
4. Refer to the following to assess port status and performance:
Name Displays the physical port name reporting runtime data and statistics. Supported ports vary depending
on controller or service platform model.
RFS4000 - ge1, ge2, ge3, ge4, ge5, up1
RFS6000 - ge1, ge2, ge3, ge4, ge5, ge6, ge7, ge8, me1, up1
RFS7000 - ge1, ge2, ge3, ge4, me1
NX4500 - up1, up2
NX4524 - ge1-ge24, up1, up2
NX6500 - up1, up2
NX6524 - ge1-ge24, up1, up2
NX9000 series- ge1, ge2
Type Displays the physical port type. Cooper is used on RJ45 Ethernet ports and Optical materials are used
on fiber optic gigabit Ethernet ports.
Description Displays an administrator defined description for each listed controller or service platform port.
Admin Status A green checkmark defines the port as active and currently enabled with the profile. A red “X” defines
the port as currently disabled and not available for use. The interface status can be modified with the
port configuration as needed.