Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 981)

Brocade Mobility RFS Controller System Reference Guide 969
53-1003099-01
15
Temperature is measured in centigrade. The table displays the Current Temperature
(centigrade) and a 20 Minute Average Temperature (centigrade). Compare these two items
to determine whether the BR1240’s deployment location remains consistently heated. For
more information on enabling the sensor, see Setting a Profile’s Environmental Sensor
Configuration (BR1240 Only) on page 8-530.
9. Refer to the Temperature Trend Over Last Hour graph to assess the fluctuation in ambient
temperature over the last hour. Use this graph in combination with the Light and Motions
graphs (in particular) to assess the deployment area’s activity level.
10. Refer to the Temperature Trend Over Last Day graph to assess whether deployment area
temperature is consistent across specific hours of the day. Use this information to help
determine whether the BR1240 can be upgraded or powered off during specific hours of the
day.
11. Select the Motion tab.
FIGURE 162 Access Point - Environmental Sensor screen (Motion tab)
12. Refer to the Motion table to assess the sensor's detected movement within the BR1240’s
immediate deployment area.