Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 611)

Brocade Mobility RFS Controller System Reference Guide 599
53-1003099-01
10
FIGURE 21 WIPS Policy screen - Settings tab
6. If creating a new WIPS Policy, assign it name to help differentiate it from others that may have
a similar configuration. The policy name cannot exceed 64 characters. The name cannot be
modified as part of the edit process.
7. Within the Wireless IPS Status field, select either the Enabled or Disabled radio button to
either activate or de-activate the WIPS policy. The default setting is enabled.
8. Enter the Interval to Throttle Packets in either Seconds (1 - 86,400), Minutes (1 - 1,400),
Hours (1 - 24) or Days (1). This interval represents the duration event duplicates are not stored
in history. The default setting is 120 seconds.