Brocade Mobility RFS Controller System Reference Guide (Supporting software release 5.5.0.0 and later) - Manual (Page 84)

72 Brocade Mobility RFS Controller System Reference Guide
53-1003099-01
5
2. Select Devices from the Configuration tab.
The Device Configuration screen displays a list of managed devices or peer controllers,
service platforms or Access Points.
3. Select a device (by double-clinking it) from amongst those displayed within the Device
Configuration screen.
Devices can also be selected directly from the Device Browser in the lower, left-hand, side of
the UI.
4. Expand the RF Domain Overrides menu option to display its sub-menu options.
5. Select RF Domain.
FIGURE 18 RF Domain Overrides screen
NOTE
A blue override icon (to the left of a parameter) defines the parameter as having an override applied.
To remove an override go to the Basic Configuration section of the device and click the Clear
Overrides button. This removes all overrides from the device.